Water, Fire, and Mold Damage Restoration in Missoula, MT

Our restoration team conducted a thorough moisture inspection and mapped the affected areas. We performed hammer-probe testing across subfloor sections to determine the boundary of moisture intrusion, then removed affected laminate flooring and subflooring. We applied antimicrobial treatments to the subfloor, cleared away debris, and installed temporary subflooring. In the garage, damaged drywall was removed to inspect internal structures and access impacted insulation, while specialized drying equipment—including dehumidifiers, air movers, and an air scrubber—was deployed and adjusted throughout the property.

We performed an immediate water damage mitigation and structural extraction procedure. Our technicians pulled back the affected carpet and removed saturated underlay, then executed controlled floor access cuts to reach the joist space and pinpoint the leaking copper supply line. We extracted standing moisture from the subfloor and installed commercial centrifugal air movers and LGR dehumidifiers to dry out the exposed wooden joists, ceiling cavity, and surrounding carpet. Additionally, we applied an EPA-registered antimicrobial treatment across all damp surfaces to prevent mold growth before structural and drywall repairs could begin.

The team conducted air readings and updated moisture points using a hammer probe. Crawlspace psychometrics were monitored, showing 77 degrees with 28% humidity. Desiccant ducting in the crawlspace was adjusted to concentrate drying efforts on the highly saturated materials in the affected areas. Additionally, grout lines were continuously removed from the tile in the laundry room to aid in drying the subfloor underneath.

The restoration team conducted an inspection of the affected crawlspace to determine the extent of moisture intrusion and identify materials requiring mitigation. A comprehensive mitigation plan was developed to address the water entry and prevent further damage. The cause of the water intrusion, linked to an exterior irrigation system, was documented for potential insurance claim consideration.

The technician completed a monitoring visit to evaluate the drying progress of the affected areas. Moisture readings confirmed that the flooring had reached the required drying standards, allowing the injector dryer to be removed. Additional moisture readings were taken along the basement ceiling to verify that no residual moisture remained or extended downward. A total of 180 square feet of floor protection was maintained during the restoration process. The equipment used during the drying process included one injector dryer with six pads and two air movers. After confirming that the affected materials were adequately dry and no remaining moisture was detected, the drying equipment was removed and the affected area was cleared for completion.

The damaged insulation and drywall were addressed and prepared for replacement. Vent piping was reinstalled to restore the affected system properly. Following necessary repairs, reconstruction work and painting were completed to restore the area to its pre-loss condition.

Restoration technicians inspected the affected areas, assessed the extent of moisture impact, and took necessary steps to prevent further deterioration. Professional dehumidification equipment was installed to control humidity and support the drying process. Affected areas were monitored, and damaged materials were addressed as needed. Reconstruction work was also completed to repair surfaces and restore the property to its pre-loss condition.

Dayspring Restoration conducted a thorough assessment using a FLIR thermal imaging camera to precisely locate hidden water intrusion and moisture patterns in the affected areas, specifically a hallway near a doorway. An AcuRite digital monitor was used to track critical indoor humidity levels, which were found to be exceptionally high at 85%. Comprehensive water damage restoration services were implemented, including drying and dehumidification, to mitigate the moisture, prevent further damage, and restore the property to its pre-damage condition.

DaySpring Restoration provided comprehensive fire damage restoration services. This included thorough cleaning and restoration of the affected exterior surfaces, such as the eaves, siding, and roof, to return the property to its pre-damage condition.

Dayspring Restoration performed a thorough water damage assessment, including using a moisture meter to identify affected carpeted areas and inspecting potential sources like appliances and water heaters. The restoration process involved identifying the extent of the damage, mitigating further spread, and initiating drying and restoration protocols to address the water intrusion.

Dayspring Restoration provided comprehensive water damage restoration services. This included a thorough inspection using advanced moisture meters to detect hidden moisture along baseboards and walls, as well as thermal imaging cameras to identify temperature differentials indicative of water intrusion. These initial steps are crucial for accurately mapping out the affected areas and formulating an effective drying and restoration plan to address the water damage.

Dayspring Restoration provided comprehensive water damage restoration services, including inspection with moisture detection tools and addressing issues in the property's crawl space.